This is a Tecumseh 120 volt electric starter, part number 37000 pulled from an HMSK80 engine. It is in good used condition and has been cleaned, lubed, and tested. Comes complete with mounting hardware. Any questions just ask. I have lots of parts for many different Tecumseh engines, let me know what you need.
Nice dual shaft engine removed from a Cub Cadet… HMSK85is the actual model… Electric starter included, probably will work with a switch…. Pulleys also included, actually everything on the motor is included… Almost forgot, 2 broken off mounting bolts in the front of engine… As seen in photo..
I pulled from Yard Machine Blower that auger drive was damaged. The motor has been sitting so rather then fiddle with carburetor I installed a new one and the engine started frist pull. I replaced the recoil start rope and the starter was no good.
This listing is for a USED Tecumseh HMSK80 8HP Short Block. This is in good overall condition. This was removed from a running snowblower. The cylinder walls are in good shape. No heavy scratches or excessive wear marks. The head will need to be re torqued and will need a new head gasket more than likely. There is no damaged threads. The crank is good. No odd sounds when it was running and did not smoke. Cylinder walls have been coated with oil to prevent corrosion. Look closely at each photo and compare.
This listing is for a USED Tecumseh HMSK80 8HP Short Block. This is in good overall condition. This was removed from a running snowblower. The cylinder walls are in good shape. The issue is I broke a bolt pulling the head to show the cylinder walls. It is seen in the photo’s. Look closely at each photo and compare.
This listing is for a USED Tecumseh HMSK80 8HP Short Block. This is in good overall condition. This was removed from a running snowblower. The cylinder walls are in good shape. No heavy scratches or excessive wear marks. The head will need to be re torqued and will need a new head gasket more than likely. There is no damaged threads. The crank is good. No odd sounds when it was running and did not smoke. Cylinder walls have been coated with oil to prevent corrosion. Look closely at each photo and compare.