Tag Archive » vintage

Home » vintage

Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers

May 21, 2026
Comments Off
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers

Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers
This offer is for a complete used 24 width cast iron gear case assembly known as part # 610984, 61098400 and 51003200 which contains the gear set part # 510014 inside of it. This gear-case had a new helical ring gear and bushings installed a few years ago by us (the input shaft is original and was in perfect shape) – and then the motor on the unit gave up this winter. We decided to recycle the gear-case because this case is ready to use with little use received after the prior refresh – and it has good known parts in it. A new gear set by itself was last 262.00 and the last price for the original gear case was 699.00. There is a new version cast iron case that can replace this part- but it’s no where near as tough as the original was (is). This part is pre-built, and ready to install and use now. We are including a new bottle of Ariens L-3 full synthetic gear oil (worth 17.00) as well as new shear bolts for the auger tines, and new roll pins for the impeller – all you need to reassemble your unit is with the gear box. You will reuse your original aluminum/bronze support flanges for the rake shaft, and your original ball bearing for the rear impeller shaft. We’d suggest you check the impeller shaft support ball bearing while you are doing the job, because it’s 30+ years old too. Then this case assy will not work for you. We have carefully packed this part to make sure it arrives in good condition – we have placed poly tubes over the shaft ends to make sure they don’t poke out of the box and get messed up, and plenty of padding inside the box to minimize shifting. The new shear pins are under one of the box flaps, and the box is marked accordingly. The box is a work of art itself. Please feel free to send an inquiry about applications and/or fitment to your unit. Can’t find what your looking for? The free listing tool.
Ariens 61098400 510014 Vintage CAST IRON 24 GEARBOX for older snowblowers

Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura

May 8, 2026
Comments Off
Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura
Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura
Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura
Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura
Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura
Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura
Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura
Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura
Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura

Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura
This is a new never started Engine. Never had oil or gas. It does gave grease and oil on it because it was stored filled up in a pile of motors. The top cover has a dent in it and it has scratches and scuffs. I have put some of these Engines on push mowers and they all started right up. I have not had a problem yet. This come out of a small engine shop that has been closed for a while. What you see is what you get any questions just ask.
Tecumseh 3.8HP Engine, NOS Engine, Vintage Tecumseh, Murray 22 in, 3.8 Centura

Vintage 1979 24 Ariens 924038 Snow Blower Self Propelled Electric Start

July 17, 2025
Comments Off
Vintage 1979 24 Ariens 924038 Snow Blower Self Propelled Electric Start
Vintage 1979 24 Ariens 924038 Snow Blower Self Propelled Electric Start
Vintage 1979 24 Ariens 924038 Snow Blower Self Propelled Electric Start
Vintage 1979 24 Ariens 924038 Snow Blower Self Propelled Electric Start
Vintage 1979 24 Ariens 924038 Snow Blower Self Propelled Electric Start
Vintage 1979 24 Ariens 924038 Snow Blower Self Propelled Electric Start
Vintage 1979 24 Ariens 924038 Snow Blower Self Propelled Electric Start
Vintage 1979 24 Ariens 924038 Snow Blower Self Propelled Electric Start

Vintage 1979 24 Ariens 924038 Snow Blower Self Propelled Electric Start
1979 24 Ariens 924038 Snow Blower Self Propelled – Electric Start. Out of This World Collectibles? Out of This World Collectibles specializes in Rock & Roll records & collectibles like The Beatles, Stones, Kiss, and much more. We carry Star Wars items, Plush toys, Sports, and Movie items, and so much more. About Out of This World Collectibles. We grade our items accurately and sell them in the original condition we receive them. This classic 1979 Ariens 924038 snow blower, originally my Dad’s and later passed to me, is now available as I need a smaller model. It’s a gas-powered, self-propelled unit with a 24-inch clearing width, featuring a 5-speed transmission (rarely used beyond 2nd gear). It offers both electric start (with included cord) and recoil start options. The directional chute adjusts for throwing height and can hurl snow a good distance, keeping it out of your face. This appears to be a three-stage blower, equipped with good tires and snow chains, and includes one key. Note: It currently struggles to stay running and most likely requires a tune-up. Used in good condition but needs a tune-up to run reliably. Tires and chains are in excellent shape. If you would like to see more photos or have any questions, please feel free to ask. Thank you for looking. I really appreciate your business.
Vintage 1979 24 Ariens 924038 Snow Blower Self Propelled Electric Start

Vintage Ariens Gravely Snowblower 1 ID Helicon Gear & Worm Shaft with Keyway SAVE

June 25, 2025
Comments Off
Vintage Ariens Gravely Snowblower 1 ID Helicon Gear & Worm Shaft with Keyway SAVE
Vintage Ariens Gravely Snowblower 1 ID Helicon Gear & Worm Shaft with Keyway SAVE
Vintage Ariens Gravely Snowblower 1 ID Helicon Gear & Worm Shaft with Keyway SAVE
Vintage Ariens Gravely Snowblower 1 ID Helicon Gear & Worm Shaft with Keyway SAVE
Vintage Ariens Gravely Snowblower 1 ID Helicon Gear & Worm Shaft with Keyway SAVE
Vintage Ariens Gravely Snowblower 1 ID Helicon Gear & Worm Shaft with Keyway SAVE
Vintage Ariens Gravely Snowblower 1 ID Helicon Gear & Worm Shaft with Keyway SAVE
Vintage Ariens Gravely Snowblower 1 ID Helicon Gear & Worm Shaft with Keyway SAVE

Vintage Ariens Gravely Snowblower 1 ID Helicon Gear & Worm Shaft with Keyway SAVE
This is a nice old school Ariens cast iron auger gear set. The worm shaft is about 15 5/8 long and has a keyway, not spline. Helicon gear has a 1″ ID (I may also have the older 7/8″ ID gears if you need that type instead). Parts are in great condition with no visible wear or damage. If you have any questions, or are not sure if these parts will fit your machine, please ask.
Vintage Ariens Gravely Snowblower 1 ID Helicon Gear & Worm Shaft with Keyway SAVE
1 2 3 … 7