John Deere Model 36 snow thrower for pre 1968 110 or 112. Have equipment on site to load.
John Deere Model 36 snow thrower for pre 1968 110 or 112. Have equipment on site to load.
John Deere Model 36 snow thrower for pre 1968 110 or 112. Have equipment on site to load.
This is a good used 4-way chute control assembly from a Cub Cadet 524 SWE snowblower, model number 31AH53TR010. Comes with cables and turn/tilt actuators as shown.
This is a set of good used cast iron auger gearbox castings from a Simplicity P1524E snowblower, model #1695665.
1994 John Deere TRS32 two stage snowblower. Strong running 10hp Tecumseh engine with electric and pull start. 6 speeds forward and 2 reverse. Machine has just been serviced and is all set for the upcoming winter season! Built to last and has been well maintained.
This is a good used worm shaft from a Simplicity 860 snowblower.
This is the hex shaft/friction wheel assembly from a Simplicity 860E snowblower. Comes with drive sprocket and chain, plus bearings.
Works like new all functions work perfectly!
Used gearbox removed from 359 John Deere snowblower. Feels tight with little backlash. One key way shows a little wear, but it shouldn’t affect function/performance.
This 2003 Ariens 1336 Pro 36 Inch Snowblower is a MONSTER snowblower! With a 36-inch clearing width, it can handle even the heaviest snowfalls. Was Used A Handful Of Times, See Photos, In Fact It’s Been Stored Away Most Of It’s Life. Has Hand Warmers, Toggle Switch Directional Chute Control, Electric Start, Two Speed Reverse And 5 Speed Forward and Headlight. Light wear includes a few spots paint wear behind blades and paint wear in chute. All paint is original factory paint, has not been repainted or touched up. May need new battery, it’s been in storage for quite some time. Jumped before listing, starts right up no problem, just don’t know if battery will hold charge because of battery age and length of storage. If you have any questions feel free to ask.