TWO John Deere TIRE RIM WHEEL assemblies 13×5.00-6 for some Garden Tiller Snow Blower Thrower with 3/4 ID shaft. Your assemblies will arrive aired up and ready to mount on your axle. Please read the add fully and see pictures top of page before you ask questions as we have detailed information in the description about this product. Does not fit all models! These are DIRECTIONAL (1)RIGHT / (1)LEFT Assemblies (SEE PICTURES). Part Numbers: 86151-L and 86151-R. BRAND: Kenda SIZE: 13×5.00-6 TREAD: A-478 Traction. DESCRIPTION: 2ply (load range “A”) Tube-Less R-1 Tiller / Snow blower Tire NHS. Height: 12.8 inches Width: 5.0 inches Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NOTE: NHS This tire a N on H ighway S ervice Tire. BRAND: Monitor (MADE IN THE U S A) Rim Size: 6 x 4.375. Rim Diameter: 6 ” Rim Width: 4.375 “. One piece Welded Steel / Drive Axle /. Center Hole Opening: 3/4 (uses 3/4 inch shaft or axle) {see picture above}. Shaft Length: 5.25 over all SHAFT length measured through the center of the rim; shaft end to shaft end. Dowel hole size: 0.25 Shaft Offset: {see picture above}. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of Rim: valve stem side – 1.25 inch {see picture above}. Inside of Rim: towards the frame of mower 3.50 inches {see picture above}. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. Original Equipment applications include: John Deere. Troy, Snapper, Arens, Murray. Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.
TWO John Deere TIRE RIM WHEEL assemblies 13×5.00-6 for some Garden Tiller Snow Blower Thrower with 3/4 ID shaft. Your assemblies will arrive aired up and ready to mount on your axle. Please read the add fully and see pictures top of page before you ask questions as we have detailed information in the description about this product. Does not fit all models! These are DIRECTIONAL (1)RIGHT / (1)LEFT Assemblies (SEE PICTURES). Part Numbers: 86151-L and 86151-R. BRAND: Kenda SIZE: 13×5.00-6 TREAD: A-478 Traction. DESCRIPTION: 2ply (load range “A”) Tube-Less R-1 Tiller / Snow blower Tire NHS. Height: 12.8 inches Width: 5.0 inches Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NOTE: NHS This tire a N on H ighway S ervice Tire. BRAND: Monitor (MADE IN THE U S A) Rim Size: 6 x 4.375. Rim Diameter: 6 ” Rim Width: 4.375 “. One piece Welded Steel / Drive Axle /. Center Hole Opening: 3/4 (uses 3/4 inch shaft or axle) {see picture above}. Shaft Length: 5.25 over all SHAFT length measured through the center of the rim; shaft end to shaft end. Dowel hole size: 0.25 Shaft Offset: {see picture above}. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of Rim: valve stem side – 1.25 inch {see picture above}. Inside of Rim: towards the frame of mower 3.50 inches {see picture above}. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. Original Equipment applications include: John Deere. Troy, Snapper, Arens, Murray. Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.
This is a good used 3 speed Peerless 700 transmisson from a 21 Troy Bilt/Bolens/Garden Way snowblower. Please ask if you have any questions. I have many more parts for these machines, let me know what you need!
13×5.00-6 13×500-6 13/5.00-6 TIRE RIM WHEELs Garden Tiller Snow Blower Thrower. Your assemblies will arrive aired up and ready to mount on your axle. Please read the add fully and see pictures top of page before you ask questions as we have detailed information in the description about this product. These are DIRECTIONAL (1)RIGHT / (1)LEFT Assemblies (SEE PICTURES). Part Numbers: 86151-L ; 86151-R. This Kenda tire rim assembly is designed for medium to heavy-duty usage and fits some but not all models of various brands including McCullagh, Worx, DR Trimmer, Ditch Witch, Brunton, and more. The 13×5.00-6 size and 2-ply construction make it suitable for self-propelled tillers, trimmers, brush mowers, and even go karts, snow blowers, and throwers. Items included in this (2)first quality new tire & rim assemblies mounted with 1/4 inch dowel hole and 3/4 inch ID axle rims, aired up and ready to mount. The equipment types it can be used with include ground drive, mowers, edger’s, carts, wagons, pulling, traction, ground driven equipment, snow throwers, snow removal, snow plows, rear tine tillers, garden tillers, garden equipment, chippers, shredders, and more. BRAND: Kenda SIZE: 13×5.00-6 TREAD: A-478 Traction. DESCRIPTION: 2ply (load range “A”) Tube-Less R-1 Tiller / Snow blower Tire NHS. Height: 12.8 inches Width: 5.0 inches Rim Diameter: 6 inch. Weight Capacity: 295 lbs. NOTE: NHS This tire a N on H ighway S ervice Tire. BRAND: Monitor (MADE IN THE U S A) Rim Size: 6 x 4.375. Rim Diameter: 6 ” Rim Width: 4.375 “. One piece Welded Steel / Drive Axle /. Center Hole Opening: 3/4 (uses 3/4 inch shaft or axle) {see picture above}. Shaft Length: 5.25 over all SHAFT length measured through the center of the rim; shaft end to shaft end. Dowel hole size: 0.25 Shaft Offset: {see picture above}. AMOUNT OF SHAFT sticking out {each side of rim}. Outside of Rim: valve stem side – 1.25 inch {see picture above}. Inside of Rim: towards the frame of mower 3.50 inches {see picture above}. The remaining portion of the shaft is between the two halves of the rim, giving this type rim superior strength and stability. Original Equipment applications include: Husqvarna, John Deere, Troy, Snapper, Arens, Murray. Toro, Bobcat, Brunton, MTD, Ditch Witch and many other brand Mowers, Tillers and Trenchers and Snow blowers. Carter Brothers, Roketa, Helix and other brand GO KARTS and many other LIVE AXLE TYPES EQUIPMENT used in various industrial applications. CUSTOM BUILDERS AND ALL DEALERS WELCOME.
This is perfect for clearing snow from driveways and walkways. EASY MANEUVERABILITY: The lightweight electric snowblower is only 31.2lb is easy to assembly and use.
Adjustable nozzle length, comfortable to hold, stable and labor-saving. With powerful engine, the leaf blower will help you easily clean leaves, gravel, rainwater, and snow. Widely Use: Designed for household and professional users, our leaf blower will help you clean up leaves, sand, gravel, pet hair and more, and can also be used for winter snow removal, engineering dust removal and car drying.
Snow Blower Cab Cleaner Freeze Resistant Single/2 Stage – Garden Yard No-Drill. When the snow starts to fly, you’ll have to go out and clean off your sidewalk and driveway. You start up the snowblower and begin your first pass. Then the wind catches the flying snow and within moments you are freezing cold, and wet. Prevent this from happening with the Guide Gear Snow Thrower Cab. This Cab has a strong, powder-coated steel frame enclosure to stop that flying snow from hitting you. The large, thick, freeze-resistant poly plastic windows allow you to see where you are going, even in the most howling of winds. Plus, it installs in mere minutes without needing to drill holes in your snowblower. Clearing your driveway of snow is never fun, but with this Cab, at least you can keep a little warmer and definitely drier while doing it. Installs in minutes with standard hand tools, no drilling required. Thick, freeze-resistant poly plastic windows. Fits single-stage or two-stage snow throwers. Boxes, or any US Protectorates. Unless stated otherwise, y. You will be required to send photos/videos.
John Deere Model 36 snow thrower for pre 1968 110 or 112. Have equipment on site to load.
OEM Garden Tractor Front Mount Snow Blower 50. If you have any questions feel free to ask. Please let us know if this is. If this is going to a business address we need to know the name of the business and if there will be a forklift or loading dock. (weekends excluded) Total U. PR, HI, AK Do not. We will work closely with you and try our best to resolve any issues. We’re here to help! We will get back to you promptly.
This is a good used 3 speed Peerless 700 transmisson from a 21 Troy Bilt/Bolens/Garden Way snowblower. Please ask if you have any questions. I have many more parts for these machines, let me know what you need!
Vintage 40 International Cub Cadet Garden Rototiller Tiller. Will sell parts if you send message with details. Pictures serve as part of the description so please view pictures carefully.