This listing is for a USED Tecumseh HMSK80 8HP Short Block. This is in good overall condition. This was removed from a running snowblower. The cylinder walls are in good shape. No heavy scratches or excessive wear marks. The head will need to be re torqued and will need a new head gasket more than likely. There is no damaged threads. The crank is good. No odd sounds when it was running and did not smoke. Cylinder walls have been coated with oil to prevent corrosion. Look closely at each photo and compare.
This listing is for a USED Tecumseh HMSK80 8HP Short Block. This is in good overall condition. This was removed from a running snowblower. The cylinder walls are in good shape. No heavy scratches or excessive wear marks. The head will need to be re torqued and will need a new head gasket more than likely. There is no damaged threads. The crank is good. No odd sounds when it was running and did not smoke. Cylinder walls have been coated with oil to prevent corrosion. Look closely at each photo and compare.
This listing is for a USED Honda HS828S Complete Transmission & Gearbox. This is a good low hour unit. The bearings are good all around. None are wobbly none are seized. Belt pulleys bearings are good and the pulleys themselves are not heavily warn or grooved. The video I shot one handed so its not the greatest but it shows normal front drive neutral and reverse. It does not creep in neutral. This had zero leaks. This comes exactly as you see it. Good solid chassis and driveline. The belt in the photo’s is included. Its not bad and is free. This will be stored full of fluid. This will require direct signature confirmation.
This listing is for a USED Tecumseh HMSK80 8HP Short Block. This is in good overall condition. This was removed from a running snowblower. The cylinder walls are in good shape. The issue is I broke a bolt pulling the head to show the cylinder walls. It is seen in the photo’s. Look closely at each photo and compare.
This listing is for a USED Tecumseh HMSK80 8HP Short Block. This is in good overall condition. This was removed from a running snowblower. The cylinder walls are in good shape. No heavy scratches or excessive wear marks. The head will need to be re torqued and will need a new head gasket more than likely. There is no damaged threads. The crank is good. No odd sounds when it was running and did not smoke. Cylinder walls have been coated with oil to prevent corrosion. Look closely at each photo and compare.
This listing is for a USED Honda HS828S Handlebars/Controls. The controls all move as they should. The cables in the photo’s are good and come with it. This comes exactly as photo’d. Nothing is stuck or seized. These are not bent.