All but brand new. Less than 5 hours on the engine. It has electric and pull start, AWD forward and Reverse, joystick operated blower and a headlight. Was used 3 times in last 3 years. Very clean, starts right up and is very easy to use.
HONDA HSS 1332 928 724 ATD Custom Molded HDPE Chute Deflector. NEW updated design with larger opening. This bolts on to HSS chutes to contain most of the blow by or misting that happens when throwing light or powdery snow. Produces a tighter more controlled stream of discharge. Very durable and molded HPDE material. Chute MUST be drilled for bolts and oem u-shape collar MUST be removed from base of chute with a cutoff grinder wheel. If it looks like last picture, both styles of oem collar MUST be removed for this deflector to work properly. Item(s) come as shown unless otherwise stated. USA LOWER 48 STATES SALES ONLY! Additional rates may apply for HI, AK, etc. NO INTERNATIONAL SALES, SORRY!
This is a good used idler/tensioner/brake arm assembly from a Honda HS80 snowblower. These parts have not been available for a while and grow rarer every year. Please ask if you have any questions. I have many more parts for these machines, let me know what you need!
The Honda snowblower HSS724A is a reliable and efficient two-stage snow blower that runs on gasoline. This model is known for its durability and performance, making it a practical choice for keeping your yard and garden clear of snow during the winter months. With a brand like Honda, you can trust that this snow blower will get the job done effectively and efficiently. Just needs a tune-up to get it back in top condition, ready to tackle your next snow removal project.
This is a used set of auger gears from a Honda HS80 snowblower. The gear teeth are excellent, but some metal has flaked off the shaft near the keyway. The key is still held in place securely, and this portion fits inside the pulley so it shouldn’t be an issure. These parts have not been available for a while and grow rarer every year. Please ask if you have any questions. I have many more parts for these machines, let me know what you need!
This is a nice used impeller from a Honda HS80 wheeled snowblower. This is a few inches larger than the impeller used on the tracked machines. They call it a 14″, but it’s more like 12″. These parts have not been available for a while and grow rarer every year. Please ask if you have any questions. I have many more parts for these machines, let me know what you need!
This listing is for a USED Honda HS828S Track Drive Auger Housing. This was painted afew different times. There is no pin holes or soft spots I stabbed around this thing with a pick for awhile. The bottom edge has some damage seen in the photo’s. There is one broken bolt seen in the photo’s. Look closely at each photo.
This is a good used set of auger side covers from a Honda HS80WA snowblower. These are the taller version that fit the wheeled machines. Tracked machines require a different set Comes with a set of used runners with a little bit of life left. These parts have not been available for a while and grow rarer every year. Please ask if you have any questions. I have many more parts for these machines, let me know what you need!