https://snowblowersgroup.com Wed, 06 May 2026 10:32:43 +0000 en-US hourly 1 https://wordpress.org/?v=4.1.1 https://snowblowersgroup.com/honda-hs828s-track-drive-snowblower-auger-housing-read-below-b682/ https://snowblowersgroup.com/honda-hs828s-track-drive-snowblower-auger-housing-read-below-b682/#comments Tue, 22 Jul 2025 17:11:31 +0000 https://snowblowersgroup.com/honda-hs828s-track-drive-snowblower-auger-housing-read-below-b682/






















This listing is for a USED Honda HS828S Track Drive Auger Housing. This was painted afew different times. There is no pin holes or soft spots I stabbed around this thing with a pick for awhile. The bottom edge has some damage seen in the photo’s. There is one broken bolt seen in the photo’s. Look closely at each photo.

]]> https://snowblowersgroup.com/honda-hs828s-track-drive-snowblower-auger-housing-read-below-b682/feed/ 0 https://snowblowersgroup.com/honda-hs828-gx240-8hp-complete-running-engine-2-b682/ https://snowblowersgroup.com/honda-hs828-gx240-8hp-complete-running-engine-2-b682/#comments Sun, 15 Dec 2024 22:17:50 +0000 https://snowblowersgroup.com/honda-hs828-gx240-8hp-complete-running-engine-2-b682/





















This listing is for a USED Honda HS828S Track Drive Complete Running Engine. This will need a carb cleaning, rebuild or replacement. You can hear it surging at low idle. My videography skills are not top tier but you get an idea of what you are purchasing. The fuel tank insides are solid. The level sensor works. Electric Start works as it should.

]]> https://snowblowersgroup.com/honda-hs828-gx240-8hp-complete-running-engine-2-b682/feed/ 0 https://snowblowersgroup.com/tecumseh-hmsk80-8hp-short-block-engine-b682/ https://snowblowersgroup.com/tecumseh-hmsk80-8hp-short-block-engine-b682/#comments Fri, 13 Dec 2024 22:11:46 +0000 https://snowblowersgroup.com/tecumseh-hmsk80-8hp-short-block-engine-b682/
















This listing is for a USED Tecumseh HMSK80 8HP Short Block. This is in good overall condition. This was removed from a running snowblower. The cylinder walls are in good shape. No heavy scratches or excessive wear marks. The head will need to be re torqued and will need a new head gasket more than likely. There is no damaged threads. The crank is good. No odd sounds when it was running and did not smoke. Cylinder walls have been coated with oil to prevent corrosion. Look closely at each photo and compare.

]]> https://snowblowersgroup.com/tecumseh-hmsk80-8hp-short-block-engine-b682/feed/ 0 https://snowblowersgroup.com/honda-hs828s-track-drive-hydrostatic-transmission-chassis-frame-gearbox-b682/ https://snowblowersgroup.com/honda-hs828s-track-drive-hydrostatic-transmission-chassis-frame-gearbox-b682/#comments Sat, 02 Nov 2024 01:51:42 +0000 https://snowblowersgroup.com/honda-hs828s-track-drive-hydrostatic-transmission-chassis-frame-gearbox-b682/
























This listing is for a USED Honda HS828S Complete Transmission & Gearbox. This is a good low hour unit. The bearings are good all around. None are wobbly none are seized. Belt pulleys bearings are good and the pulleys themselves are not heavily warn or grooved. The video I shot one handed so its not the greatest but it shows normal front drive neutral and reverse. It does not creep in neutral. This had zero leaks. This comes exactly as you see it. Good solid chassis and driveline. The belt in the photo’s is included. Its not bad and is free. This will be stored full of fluid. This will require direct signature confirmation.

]]> https://snowblowersgroup.com/honda-hs828s-track-drive-hydrostatic-transmission-chassis-frame-gearbox-b682/feed/ 0 https://snowblowersgroup.com/tecumseh-hmsk80-dual-shaft-8hp-short-block-broken-bolt-b682/ https://snowblowersgroup.com/tecumseh-hmsk80-dual-shaft-8hp-short-block-broken-bolt-b682/#comments Sat, 19 Oct 2024 20:51:43 +0000 https://snowblowersgroup.com/tecumseh-hmsk80-dual-shaft-8hp-short-block-broken-bolt-b682/










This listing is for a USED Tecumseh HMSK80 8HP Short Block. This is in good overall condition. This was removed from a running snowblower. The cylinder walls are in good shape. The issue is I broke a bolt pulling the head to show the cylinder walls. It is seen in the photo’s. Look closely at each photo and compare.

]]> https://snowblowersgroup.com/tecumseh-hmsk80-dual-shaft-8hp-short-block-broken-bolt-b682/feed/ 0 https://snowblowersgroup.com/tecumseh-hmsk80-8hp-short-block-engine-2-b682/ https://snowblowersgroup.com/tecumseh-hmsk80-8hp-short-block-engine-2-b682/#comments Thu, 17 Oct 2024 20:43:45 +0000 https://snowblowersgroup.com/tecumseh-hmsk80-8hp-short-block-engine-2-b682/












This listing is for a USED Tecumseh HMSK80 8HP Short Block. This is in good overall condition. This was removed from a running snowblower. The cylinder walls are in good shape. No heavy scratches or excessive wear marks. The head will need to be re torqued and will need a new head gasket more than likely. There is no damaged threads. The crank is good. No odd sounds when it was running and did not smoke. Cylinder walls have been coated with oil to prevent corrosion. Look closely at each photo and compare.

]]> https://snowblowersgroup.com/tecumseh-hmsk80-8hp-short-block-engine-2-b682/feed/ 0 https://snowblowersgroup.com/honda-hs828s-handlebars-controls-ignition-cables-2-b682/ https://snowblowersgroup.com/honda-hs828s-handlebars-controls-ignition-cables-2-b682/#comments Wed, 09 Oct 2024 11:31:50 +0000 https://snowblowersgroup.com/honda-hs828s-handlebars-controls-ignition-cables-2-b682/















This listing is for a USED Honda HS828S Handlebars/Controls. The controls all move as they should. The cables in the photo’s are good and come with it. This comes exactly as photo’d. Nothing is stuck or seized. These are not bent.

]]> https://snowblowersgroup.com/honda-hs828s-handlebars-controls-ignition-cables-2-b682/feed/ 0